Loyola Spatial Systems & Allen Precision Equipment Leica Dealer

GPS1200+


With a new, ultra-precise GPS measurement engine, new, fast, self-checking RTK algorithms, and a comprehensive, self-explanatory user interface.



When it says future proof GNSS, it means maximum productivity and reliability. More satellites, more GNSS signals. Today and tomorrow! With Leica GPS1200+ you can be certain that you're ready for the future. Invest today in future proof GNSS technology and be sure that your equipment can track all satellites today and tomorrow. GPS1200+ is the only real future proof GNSS System.

Plus: Accuracy and Reliability - Today

  • Accuracy
    Leica Geosystems proven GNSS accuracy rises to the next level with the very latest SmartTrack+ measurement engine technology. Enhanced signal processing and industry leading measurement quality deliver optimal accuracy even in though conditions.
  • Reliability
    GPS1200+ includes the unique SmartCheck+ technology. SmartCheck+ guarantees maximum reliability by continuously checking results. Complete trust in reliability without compromising fast initialization times allows total focus on productivity.
  • Consistency in Networks
    With Leica Geosystems' SmartRTK and RTCM 3.1 correction data, the best performance in networks is guaranteed. Never again worry about loosing consistency and traceability because of virtually computed reference stations.

Plus: More Accuracy and Speed - Tomorrow

  • GNSS Modernization
    GPS and GLONASS are continually improving and the European Galileo and Chinese Compass systems are emerging to provide additional benefits for world-wide users. With GPS1200+ all new GNSS systems are supported.
  • GPS L5
    GPS L5 is the new third GPS frequency. Through higher power emission GPS L5 offers easy and faster signal acquisition and tracking. Advanced signal modulation schemes improve multipath rejection performance. GPS1200+ will track this new signal from day one.
  • Galileo
    Galileo will add another 30 satellites to the GPS and GLONASS constellation. This will provide an average of 20 satellites in view 24/7 and will further improve speed and accuracy. Leica Geosystems is the first to offer full upgradeability to the most modern and accurate Galileo AltBOC signal.

Plus: Use it as you know it

  • GPS1200+ Series
    GPS1200+ provides all the flexibility, power and performance needed for every type of GNSS application. Built to the toughest MIL specifications, GPS1200+ withstands extreme temperatures, the worst weather and the roughest site conditions.
  • Future proof
    Leica Geosystems is the only manufacturer that can offer a compliance upgrade path to four satellite systems which is based on publicly available system definitions. GPS1200+ supports GPS, GLONASS, Galileo and Compass and GPS1200 can be easily upgraded.
  • Customer Care package
    Leica Geosystems' customers benefit from service and support that spans time zones and geography. Never again worry about down-time, professional support and service is always close by.

When it says future proof GNSS, it means maximum productivity and reliability. More satellites, more GNSS signals. Today and tomorrow. With Leica GPS1200+ you can be certain that you're ready for the future. Invest today in future proof GNSS technology and be sure that your equipment can track all satellites today and tomorrow. Future proof GNSS also means existing GPS1200 can be upgraded to the very latest technology.


Top

Leica GPS1200+ Technical specifications and system features

GPS1200+ receivers GX1230+ GNSS/
ATX1230+ GNSS
GX1220+ GNSS GX1230+ GX1220+ GX1210+
GNSS technology SmartTrack+ SmartTrack+ SmartTrack SmartTrack SmartTrack
Type Triple frequency Triple frequency Dual frequency Dual frequency Single frequency
Channels 120 channels
L1/L2/L5 GPS
L1/L2 GLONASS
E1/E5a/ E5b/ Alt-BOC Galileo Compass¹
4 SBAS
120 channels
L1/L2/L5 GPS
L1/L2 GLONASS
E1/E5a/ E5b/ Alt-BOC Galileo Compass¹
4 SBAS
(with DGPS option)
16 L1 + 16 L2 GPS
4 SBAS
16 L1 + 16 L2 GPS
4 SBAS
(with DGPS option)
16 L1 GPS
4 SBAS
(with DGPS option)
RTK SmartCheck+ No SmartCheck No No
Status indicators 3 LED indicators for GX1200+: power, tracking, memory

¹ The Compass signal is not finalized, although, test signals have been tracked with GPS1200+ receivers in a test environment. As changes in the signal structure may still occur, Leica Geosystems cannot guarantee full Compass compatibility.

GPS1200+ receivers GX1230+ (GNSS)/ GX1220+ (GNSS) GX1210+ ATX1230+ GNSS
Ports 1 power port, 3 serial ports,
1 controller port, 1 antenna port
1 power/controller port,
Bluetooth® Wireless-Technology port
Supply voltage,
Consumption
Nominal 12 VDC
4.6 W receiver + controller + antenna
Nominal 12 VDC
1.8 W
Event input and PPS Optional:
1 PPS output port
2 event input ports
Optional:
1 PPS output port
2 event input ports
Standard antenna SmartTrack+ AX1203+ GNSS SmartTrack AX1201 SmartTrack+ ATX1230+ GNSS
Built-in groundplane Built-in groundplane Built-in groundplane Built-in groundplane

The following apply to all receivers except where stated.
Power supply Two Li-Ion 4.4 Ah/7.4 V plug into receiver.
One Li-Ion 2.2 Ah/7.4 V plugs into ATX1230+ GNSS and RX1250.
Plug-in Li-Ion batteries
Same for GNSS and TPS
Power receiver + controller + SmartTrack antenna
for about 17 hours (for data logging).
Power receiver + controller + SmartTrack antenna + low power radio modem
or phone for about 11 hours (for RTK/DGPS). Power SmartAntenna + RX1250
controller for about 6 hours (for RTK/DGPS)
External power External power input 10.5 V to 28 V.
Weights Receiver 1.20 kg. Controller 0.48 kg (RX1210) and 0.75 kg (RX1250).
SmartTrack antenna 0.44 kg. SmartAntenna 1.12 kg.
Plug-in Li-Ion battery 0.11 kg (2.2 Ah) and 0.2 kg (4.4 Ah).
Carbon fiber pole with SmartTrack antenna and RX1210 controller: 1.80 kg.
All on pole: carbon fiber pole with SmartAntenna, RX1250 controller
and plug-in batteries: 2.74 kg.
Temperature
ISO9022
MIL-STD-810F
Operation: Receiver -40° C to +65° C
Antennas -40° C to +70° C
Controllers -30° C to +65° C
Controller RX1250c -30° C to +50° C
Storage: Receiver -40° C to +80° C
Antennas -55° C to +85° C
Controllers -40° C to +80° C
Controller RX1250c -40° C to +80° C
Humidity
ISO9022
MIL-STD-810F
Receiver, antennas and controllers
Up to 100 % humidity.
Protection against
water, dust and sand

IP67, MIL-STD-810F
Receiver, antennas and controllers: Waterproof to 1 m temporary submersion.
Dust tight
Shock/drop onto
hard surface
Receiver: withstands 1 m drop onto hard surface.
Antennas: withstand 1.5 m drop onto hard surface.
Topple over on pole Receiver, antennas and controllers: withstand fall if pole topples over.
Vibrations
ISO9022
MIL-STD-810F
Receiver, antennas and controllers: withstand vibrations on large
construction machines. No loss of lock.
SmartTrack+
Advanced GNSS
measurement technology
Time needed to acquire all satellites after switching on:
typically about 50 seconds. Re-acquisition of satellites after loss of lock
(e.g. passing through tunnel): typically within 1 second.
Very high sensitivity: acquires more than 99 % of all possible observations
above 10 degrees elevation. Very low noise. Robust tracking.
Tracks weak signals to low elevations and in adverse conditions.
Multipath mitigation. Jamming resistant.
Measurement precision: Carrier phase on L1: 0.2 mm rms.
On L2: 0.2 mm rms.
Code (pseudorange) on L1 and L2: 20 mm rms.
SmartCheck+
Advanced, long range
RTK technology
Initialization typically 8 seconds.
Position update rate selectable up to 20 Hz.
Latency < 0.03 secs.
Range 40 km or more in favorable conditions.
Self checking.
Accuracies:
Horizontal: 10 mm + 1 ppm, kinematic
Vertical: 20 mm + 1 ppm, kinematic
Horizontal: 5 mm + 0.5 ppm, static
Vertical: 10 mm + 0.5 ppm, static
Reliability: 99.99 % for baselines up to 40 km.
Formats supported for transmission and reception:
Leica proprietary (Leica, Leica 4G), CMR, CMR+, RTCM V2.1/2.2/2.3/3.0/3.1.
Reference station
networks
RTK rover fully compatible with Leica's Spider
i-MAX & MAX formats, VRS and Area Correction
(FKP) reference station networks.
DGPS
GX1230+ (GNSS),
ATX1230+ GNSS,
GX1220+ (GNSS) - standard
GX1210+ - optional
DGPS, includes support of MSAS, WAAS, EGNOS and GAGAN.
RTCM V2.1/2.2/2.3/3.0. formats supported for transmission and reception.
Baseline rms: typically 25 cm rms with suitable reference station.
Position update rate
and latency


NMEA output
Applies to RTK, DGPS and navigation positions.
Update rate selectable from 0.05 sec (20 Hz) to 1 sec.
Latency less than 0.03 secs.
NMEA 0183 V3.00 and Leica proprietary.
Post-processing with
Leica Geo Office
software
All GPS1200+
receivers
Horizontal: 10 mm + 1 ppm, kinematic
Vertical: 20 mm + 1 ppm, kinematic
Horizontal: 5 mm + 0.5 ppm, static
Vertical: 10 mm + 0.5 ppm, static
For long lines with long observations
Horizontal: 3 mm + 0.5 ppm, static
Vertical: 6 mm + 0.5 ppm, static
Notes on performance
and on accuracies
Figures quoted are for normal to favorable
conditions. Performance and accuracies can
vary depending on number of satellites,
satellite geometry, observation time, ephemeris,
ionosphere, multipath etc.
Controllers


RX1210/RX1250
High contrast, 1/4 VGA display
with color option (RX1250)
Touch screen, 11 lines x 32 characters.
Windows CE 5.0 on RX1250.
Full alphanumeric QWERTY keypad.
Function keys and user definable keys.
Illumination for screen and keys.
Can also be used with TPS1200+ for
alphanumeric input and extensive coding.
Operation with controller
Same for GNSS and TPS
Via keypad and/or via touch screen.
Graphical operating concept.
Function keys and user definable keys.
All information displayed.
Displayed information All information displayed: status, tracking,
data logging, database, RTK, DGPS, navigation,
survey, stakeout, quality, timer, power,
geographical, cartesian, grid coordinates etc.
Graphical display
of survey

Same for GNSS and TPS
Graphical display (plan) of survey. Zooming.
Can access surveyed points directly via touch screen.
Stakeout display
Same for GNSS and TPS
Graphical with zoom.
Digital, polar and orthometric.
Accuracy: 10 mm + 1 ppm at 20 Hz (0.05 sec)
update rate. No degradation with high update rates.
Operation w/o controller
GX1200 only
Automatic on switching on.
LED status indicators.
For reference stations and static measurements.
Data logging
Same cards used
for GNSS and TPS
On CompactFlash cards: 256 MB and 1 GB
Optional internal receiver memory: 256 MB.
Capacity 64 MB sufficient for (30 % less for GPS/GLONASS):
About 500 hours L1 + L2 data logging at 15 sec rate.
About 2,000 hours L1 + L2 data logging at 60 sec rate.
About 90,000 RTK points with codes.
Data management
Same for GNSS and TPS
User definable job management.
Point identifiers, coordinates, codes, attributes etc.
Search, filter and display routines.
Multi point averaging.
Five types of coding systems cover all requirements.
Coordinate systems
Same for GNSS and TPS
Ellipsoids, projections, geoidal models,
coordinate, transformations, transformation
parameters, country specific coordinate systems.
Fully support of RTCM 3.1 coordinate system transfer.
Application programs
Same for GNSS and TPS
Standard: Full range of COGO functions.
Hidden point.
Optional: RoadRunner, Reference Line,
DTM Stakeout, Reference Plane, Area Division
and X-Section Survey, DXF Export,
LandXML Export and Volume Calculations
Programmable
Same for GNSS and TPS
User programmable in GeoC++.
Users can write and upload programs for their
own special requirements and applications.
Communication
Data links
One or two of the following devices can be
connected: Radio modem, GSM, GPRS, CDMA.
Different frequencies and/or formats can be
received and transmitted.
Time slicing is supported.
Purchasing
For additional information
 or to request a quotation;
 Contact us on:
 geco_auh@emirates.net.ae

 or call +971 2 4436440

DOWNLOADS